Wheeler Waterworks Assoc
Get your tap water tested for lead
Lead or copper was detected above the action level at some taps
A lead violation means the 90th percentile of tap samples exceeded 0.015 mg/L — the action level that triggers mandatory response. Lead risk varies by home: older plumbing and lead service lines concentrate risk. A certified lab test (~$25) tells you your specific exposure. Look for filters certified NSF/ANSI 53 for lead reduction.
No action needed
Low lead service line risk
Should I be concerned?
Low proportion of lead service lines identified in this system.
Not tested
This system was not included in federal PFAS monitoring
Should I be concerned?
This system serves fewer than 3,300 people and was not required to participate in EPA UCMR5 testing. Absence of data is not the same as absence of contamination.
CCR data in early access — values are extracted from utility PDFs and may contain errors. Verify with your utility's 2025 CCR report.
Do you have or use a private well? Measured concentrations from nearby private wells sampled within 5 miles.
Wheeler pumps water from one groundwater well drawing from local groundwater.